Hi all,
I have a Neuron M103 which has USB and a 1-wire interface.
When I connect my sensors to the build-in port I do not find them. Connecting through a USB adapter works flawlessly!
Any idea?
I changed /etc/owfs.conf according to the device I am using. Disabled the FAKE device and tried to enable the i2c:
#server: FAKE = DS18S20,DS2405
# Setting for Neuron M103
server: device = /dev/i2c-1
#
# USB device: DS9490
#server: usb = all
Now when I do i2cdetect -l I get the correct one I used in above owfs.conf:
i2c-1 i2c bcm2835 I2C adapter I2C adapter
Seems to be the bus is recognized properly:
root@zentrale:/heizung/src# i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- 18 -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- UU -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- UU
70: -- -- -- -- -- -- -- --
Changing the device to i2c-1 in owfs.conf, restarting owfs and switching cable to Neuron port I do not get any device:
root@zentrale:/heizung/src# owdir
/bus.0
/uncached
/settings
/system
/statistics
/structure
/simultaneous
/alarm
Switching everything back to USB I get proper information:
root@zentrale:/heizung/src# owdir
/10.A224A3010800
/10.520F86010800
/10.1911A3010800
/10.2720A3010800
/28.301FF8030000
/28.5AFFBD030000
/28.8BF2BD030000
/28.0FFCBD030000
/28.FF0061711404
/28.FFC4C5701404
/28.FF92E8701404
/28.FF8A5F711404
/28.FFFAE9701404
/28.FF66E8701404
/28.FF56E9701404
/28.FF7E11711404
/28.FF6D90711404
/28.FF7D12711404
/26.29AB40010000
/81.A08830000000
/bus.0
/uncached
/settings
/system
/statistics
/structure
/simultaneous
/alarm
Any idea how to use the build-in i2c-1-wire-bus?
Greetings
/KNEBB