Help setup greenhouse automation
-
hi all,
yesterday i received the order (Thank you unipi) here is a background on my project:i am trying to setup a greenhouse to automate most of it using Unipi and jeedom. (i understand that jeedom already supported by a plugin)
the greenhouse will have the following hardware:
2 X 340v exhaust fans
2x 240v 2000w water pumps
1x rollup side motor (to open the side for the ventilation)
8x light bulbs (only turned on during maintenance at night)The hardware i have is:
raspberry pi 2
unipi boards
unipi ssr
unipi 1-wire hub
uni pi 0-10v addonthere is other components like weather station (outside and inside), some other sensors but i will add them after the basic setup is performed.
my problem is wiring not the software as i have almost no experience with relays.
any help will be great please.
-
hi all,
yesterday i received the order (Thank you unipi) here is a background on my project:i am trying to setup a greenhouse to automate most of it using Unipi and jeedom. (i understand that jeedom already supported by a plugin)
the greenhouse will have the following hardware:
2 X 340v exhaust fans
2x 240v 2000w water pumps
1x rollup side motor (to open the side for the ventilation)
8x light bulbs (only turned on during maintenance at night)The hardware i have is:
raspberry pi 2
unipi boards
unipi ssr
unipi 1-wire hub
uni pi 0-10v addonthere is other components like weather station (outside and inside), some other sensors but i will add them after the basic setup is performed.
my problem is wiring not the software as i have almost no experience with relays.
any help will be great please.