Novice in CODESYS
I am novice in Codesys UniPi for Raspberry
I have already installed all packages from the Data sheet CODESYS For UniPi that works (I purchased CODESYS Control for Rapsberry Pi SL)
But i would like to have a example project to learn if it's possible please (activate Relays, 1 wire, ...) And how can I download the project compiled into my Raspberry ?
Thank you very much
what UniPi PLC do you have?
UniPi 1.1 and a EMO R8 extension relays card
Thank you Martin
I've already do it.
Is there a project example ?
I am sorry @raph7454,
I overlooked the information that you have already installed the package. Unfortunatelly there is no example project for Codesys. If you doubleclick on the GPIO_UniPi, UniPi_Ai or UniPi_Relays you will get to the dialog where you can see available IOs and you can map them to the variables and then you can work with them in the program.
Hello @Raph7454, all of the IO on the Unipi work the same as other CODESYS devices. Use the device tab to map the IO into your application. The data sheet provides guidance on each device. The package also installs a new application template so that in one step you can create a new UniPi application with all devices installed ( you will just need to add the expansion module).
Regarding how to download, login etc. CODESYS for UniPi is adding device drivers to CODESYS for raspberry pi. There is a large active forum of users on the CODESYS forums. I suggest that for general CODESYS questions you will find answers to most of your questions already posted there.