Adding Extensions to Evok

Boernsman

I've a hard time to add an extension to evok, I tried different settings in the /etc/evok.conf - no success. Found also no documentation about the extensions and how to add them without using mervis.

Boernsman

To be more specific I use Raspbian GNU/Linux 9.1 (stretch) with a Neuron L40x and a xS30 Extension.

/etc/evok.conf:

;[EXTENSION_1]
device_name = xS30	
modbus_uart_port = /dev/extcomm/0/0		
allow_register_access = False		
scan_frequency = 2			
scan_enabled = True

DIP switches on the extension are all OFF, cable length 30cm

unix

@Boernsman

Hi
use

[EXTENSION_1]
global_id = 2							
device_name = xS30						
modbus_uart_port = /dev/extcomm/0/0 	
neuron_uart_circuit = 1_01				
allow_register_access = True 			
address = 15 							
scan_frequency = 2 					
scan_enabled = True 					
baud_rate = 19200						
parity = N								
stop_bits = 1

Regards

Boernsman

Thanks, worked out for me