Analog out connection
-
Have I got the guide right as shown below
[attachment=0:1ik92v4u]Analog4.jpg[/attachment:1ik92v4u] -
Have I got the guide right as shown below
[attachment=0:1ik92v4u]Analog4.jpg[/attachment:1ik92v4u] -
If you want to use external power supply, you do not need to make connection to the AI- and definitely not to 12V!
Just connect the positive pole to AOV, negative to AOG.
By the way, minimum voltage on the AOV is 12V in order to be able to get 10V on the AO.
-
Ok I connect like this when I should use power from Unipi
[attachment=1:1kdnxhhn]Analog1.jpg[/attachment:1kdnxhhn]and I connect like this when I use an external power supply
[attachment=0:1kdnxhhn]Analog11.jpg[/attachment:1kdnxhhn] -
Right
-
ok tanks