How to control relay extension board via EVOK?
-
Hi,
I've bought UniPi 1.1 and extension board with relays.How i can control this extension board relays via EVOK API?
-
To make extension relay module (EMO-R8) working with EVOK below steps needs to be done:
- Open /etc/evok.conf file
- Uncomment relays assigned to EMO-R8:
Each this line begins with a character ;
This character must be removed for all lines related to the configuration for EMO-R8:; ;Example of 8xRelay extension module addon (EMO-R8) on address 0x21 ; [MCP_2] i2cbus = 1 address = 0x21 [RELAY_9] mcp = 2 pin = 7 [RELAY_10] mcp = 2 pin = 6 [RELAY_11] mcp = 2 pin = 5 [RELAY_12] mcp = 2 pin = 4 [RELAY_13] mcp = 2 pin = 3 [RELAY_14] mcp = 2 pin = 2 [RELAY_15] mcp = 2 pin = 1 [RELAY_16] mcp = 2 pin = 0
- Save /etc/evok.conf file
- Restart evok