After upgrading the M503, circuit 1 completely disappeared.

tomas_hora

So what do you see when you run /opt/unipi/tools# ./fwspi -i 0 ... /opt/unipi/tools# ./fwspi -i 1 and /opt/unipi/tools# ./fwspi -i 2?

Vesa Kauppinen

Hi @tomas_hora

root@residevice:/opt/unipi/tools# ./fwspi -i 0
Boardset:     0 B-1000                         (v1.0)
Baseboard:    0 B-1000                         (v1.0)
Firmware: v5.31

root@residevice:/opt/unipi/tools# ./fwspi -i 1
Unable to create the arm[1] context

root@residevice:/opt/unipi/tools# ./fwspi -i 2
Unable to create the arm[2] context

/Vesa

tomas_hora

Just to be sure... Is the RUN2 LED blinking or not? What is the output of "dmesg | grep UNIPISPI" ?

Vesa Kauppinen

@tomas_hora said in After upgrading the M503, circuit 1 completely disappeared.:

dmesg | grep UNIPISPI

The device is hundreds of miles away, so I can't watch the LEDs.

dmesg | grep UNIPISPI doesn't output anything.

/Vesa

Vesa Kauppinen

Hi @tomas_hora,

Have you come up with new ideas in this regard?

Br,
Vesa

martin_triska

Hello @Vesa-Kauppinen,

it seems you do not have the unipi kernel module loaded. Can you try "lsmod | grep unipi"? If it still does not give any output, try to update unipi packages again.

Vesa Kauppinen

@martin_triska said in After upgrading the M503, circuit 1 completely disappeared.:

lsmod | grep unipi

Hi @martin_triska,

Thank you for your answer! I got the following answer:

root@residevice:~# lsmod | grep unipi
unipi                  94208  0
industrialio           73728  1 unipi

Martin Kudláček

Hi @vesa-kauppinen,
can you send us SSH access to the PLC? Let's continue over [email protected]

Thanks,
Martin

Vesa Kauppinen

Hi @martin-kudláček

I sent email to [email protected]

Br,
Vesa

Vesa Kauppinen

Hi @martin-kudláček !

Did you receive my email?

Br,
Vesa