@raedhammad That is not possible. The whole solution is currently stored only in your PC.

Unfortunately, that is not possible. You will be missing the fastcgi server which is the bridge which translates the protocol of the RunTime to the browser

@tomasknot Yeah I see now, thanks.

Vše vyřešeno pomocí Weintek cMT-SVR-100. Vyčítám data do své SQL databáze. Problém s časovou značkou vyřešen pomocí vlastní značky v SQL databázi.
Chápu, že jiní by to dali lépe a levněji, ale bohužel já programovat neumím.

Trochu to upřesním.
Jde mi o to, kde se dá upravit dotaz který posílá Axon do kalorimetru.

0_1543869821320_mbusmervis.jpg

Dobrý den,
je nám líto, ale podporu pro Mervis poskytujeme pouze k našim produktům.

Děkuji za pochopení a přeji pěkný zbytek dne,
Martin Kudláček

@derinex This is a behavior from the design of the Runtime. Inputs are read at the start of the cycle, outputs are sent at the end of the cycle. Connect the output act_State to the input run directly.

Hello @arolli,
this is described in the Mervis help files (F1). Look for "B31" and you will see that the input parameter is type "CONTROLLERTYPE" with a hint how to use it.

Best regards,
Martin

Hi
So it was information noise on the side of the papouch support. ;-) It's really a modbus TCP and it works. I apologize for misinformation.

Thanks a lot. It works.
I imagine that flashing SD card wasn't usefull! ;-)
Regards.

Dobry den
Dekuji za nasmerovani, me zmatlo to ze v dokumentaci je popisovana
"Nova" verze mervisu.

Dobrý den,

děkuji za info.
Tedy ale pokud budu chtít, aby mně z globální proměné řekněme aktuální spotřeby vycházel výsledek řekněme denní spotřeby je třeba na to vytvořit vlastní
FB.

Thanks,
that was it.
I seen that file in old Mervis, but thought that it is older version of Lib.UniPi,
but also was blind and don't see it in on download page.
Thank you very much, now it works.

@ckb the inverse behavior of AO was a bug and is now fixed. Since 0 is a default value, most users do not want a default 10V after startup of the application.

You would have to smoothen it in the SW - create your own function block which will add/deduct automatically every a part of the difference |current_voltage-target_voltage| every cycle(or every 0.1s). But honestly, this most probably will also cause visible steps in the dimming process.

Hello @derinex,
sorry for the communication silence. Here is the complete list of errors:

OperationStatus_Ok = 0, OperationStatus_NoSuchVariable = 1, OperationStatus_WriteFailed = 2, OperationStatus_SizeMismatch = 3, OperationStatus_Unspecified = 4, OperationStatus_Denied = 5, OperationStatus_InvalidState = 6, OperationStatus_FailedToLoadVmImage = 7, OperationStatus_EmailQueueFull = 8, OperationStatus_ToAddrTooLong = 9, OperationStatus_FromAddrTooLong = 10, OperationStatus_SubjectTooLong = 11, OperationStatus_MessageTooLong = 12, OperationStatus_ServerTooLong = 13, OperationStatus_AuthNameTooLong = 14, OperationStatus_AuthPasswordTooLong = 15, OperationStatus_UnknownChannel = 16, OperationStatus_UnknownSrcEncoding = 17, OperationStatus_UnknownDestEncoding = 18, OperationStatus_ConversionFailed = 19, OperationStatus_ConversionSourceIllegal = 20, OperationStatus_ConversionSourceExhausted = 21, OperationStatus_ConversionDestExhausted = 22, OperationStatus_Connected = 23, OperationStatus_InvalidParameter = 24, OperationStatus_NotOpened = 25, OperationStatus_Timeout = 26, OperationStatus_UnknownCommand = 27, OperationStatus_ConnectionFailed = 69, OperationStatus_ConnectionReset = 72, OperationStatus_NotConnected = 73, OperationStatus_InvalidImageVersion = 28, OperationStatus_InvalidEndian = 29, OperationStatus_ImageMarkedAsInvalid = 30, OperationStatus_Empty = 31, OperationStatus_Overlapp = 32, OperationStatus_Retry = 33, OperationStatus_Busy = 34, OperationStatus_PortAlreadyUsed = 35, OperationStatus_WrongGuid = 36, OperationStatus_InvalidCrc = 37, OperationStatus_InvalidStackType = 38, OperationStatus_NoSuchTask = 39, OperationStatus_OutOfRange = 40, OperationStatus_GsmError = 41, OperationStatus_GsmReady = 42, OperationStatus_GsmWaitingPin = 43, OperationStatus_GsmWaitingPuk = 44, OperationStatus_GsmWrongPin = 45, OperationStatus_GsmPrompt = 46, OperationStatus_QueueFull = 47, OperationStatus_Truncated = 48, OperationStatus_UnknownDriver = 49, OperationStatus_UnbalancedParenthesis = 50, OperationStatus_InvalidClass = 51, OperationStatus_NoMemory = 52, OperationStatus_FileNotFound = 53, OperationStatus_Running = 54, OperationStatus_Stopped = 55, OperationStatus_NoSuchMetadata = 56, OperationStatus_BusError = 57, OperationStatus_NvRamNotAvailable = 58, OperationStatus_ConfigurationFailed = 59, OperationStatus_PortMapInvalid = 60, OperationStatus_NoSuchDevice = 61, OperationStatus_SameValue = 62, OperationStatus_OutOfSync = 63, OperationStatus_Async = 64, OperationStatus_NotLicensed = 65, OperationStatus_LicenseExpired = 66, OperationStatus_Signaled = 67, OperationStatus_Crashed = 68, OperationStatus_NoSuchObject = 70, OperationStatus_NotIndexable = 71, OperationStatus_NoSuchItem = 74

Both states (31 and 34) are correct right after when you send the data. The need to reboot of the PLC afterwards doesn't seem to by tied to this. Can you please share the code with us? You can send it to support@unipi.technology.

Thanks!
Martin

Hi Martin
I follow the suggestion to set autogen only on needed variables (just DI and DO_w).
I solved the issue.
thanks
Antonio

Hello @joe160781,
can you please share a project with us? You can send it to support@unipi.technology.

Thanks,
Martin

Hello @arolli,

just briefly, please check https://kb.unipi.technology/en:sw:01-mervis:moving_from_2.0_to_2.1-hidden

1 - You should find question in the knowledge base
2 - You can have multiple instances of Mervis IDE installed on the same time on your PC. Mervis will ask you which version you wish to use on startup.
3 - You should find question in the knowledge base
4 - Yes