Thanks,
that was it.
I seen that file in old Mervis, but thought that it is older version of Lib.UniPi,
but also was blind and don't see it in on download page.
Thank you very much, now it works.
Latest posts made by Gif
-
RE: Missing transformation ds2408_sh_trans
-
Missing transformation ds2408_sh_trans
Hello,
I try upgrade project from Mervis 2.0.6 (48423) to latest 2.1.3 (74371),
but when using devices "1W-8R" and "1W-4R4DI",
I get error at compilation:
"can not find the transformation 'ds2408_sh_trans' in loaded projects and libraries"In Data Point Properties is now not listed such transform.
In project references I have library "Lib.UniPi", but I don't remember if there are some more steps to make it work.What I'm doing wrong?
Thanks for help. -
RE: DS2413 output
Just for info.
For me it works with DS2413 (1wire dual channel switch), at least in output mode.
I used library for DS2408 (1W-8R) and only modified family number. -
DS2413 output
Just for info.
For me it works with DS2413 (1wire dual channel switch), at least in output mode.
I used library for DS2408 (1W-8R) and only modified family number. -
RE: Factory reset delete configuration.cgi
Pokud se pripojim prez ssh a pustim rucne /var/opt/…/fastcgisvr tak web jede, tedy jen po updatu se server automaticky nespousti. Moje vzpominky na linux ale nejsou dostacujici abych hned vedel kam sahnout (nejake to init.d a tam "neco restart"?)
PS: "fastcgisvr" = nepamatuji se jak se to jmenuje (stale mam ze pocitac s internetem != pocitac kde pristupuji na unipi)
PPS: Co delam spatne? (prece nejsem jediny kdo to pouziva) -
RE: Factory reset delete configuration.cgi
Tak to vypadá že to rozbiju nahráním RT
Postup:
- Na SD kartu nahraji image jessie-2015-12-08
- Nabootoji Raspberry/UniPi a připojím se na web - je tam vzorový projekt (obrazek UniPi a ovladani relatek), web funguje
- V MervisIDE otevřu projekt a přiřadím PLC
- Nahraji můj web - ten sice nefunguje (není nahraná sestava) ale stáhne všechny soubory
- V MervisIDE dám Nahrát RT (abych mohl nahrát sestavu)
- Teď už při otevření webu nenačte soubor /configuration.cgi (vrací 404).
Mám pocit že vzorový web otevíral soubory .cgi ale můj po nahrání RT chce načítat soubory .ashx
-
RE: Audio output
Please, what is preferred way to output audio (play one of predefined sound samples) controlled by Mervis?
I expect communication by tcp socket with some existing linux player, but maybe some example exists?
Thanks for any hints. -
Audio output
Please, what is preferred way to output audio (play one of predefined sound samples) controlled by Mervis?
I expect communication by tcp socket with some existing linux player, but maybe some example exists?
Thanks for any hints. -
RE: Password for provided image
Sorry for stupid question, but what is default user/password for provided image jessie-2015-12-08 ?
Tried pi/raspberry and root/unipi but no luck. -
Password for provided image
Sorry for stupid question, but what is default user/password for provided image jessie-2015-12-08 ?
Tried pi/raspberry and root/unipi but no luck.